  |
|
 |
 |
|
|||||
  |
| ||||
| Belt Designation (EP Nylon/ Nylon) | Max. Recommended Working Tesion (Vulcananised Splice) | Nominal Carcass Thickness | Nominal Carcass Weight | Max. Belt Width (mm) For Satisfactory Load Support (Material Density in T/m³ | Min. Belt Width (mm) For Satisfactory Troughing | |||||
| Tyre | Rating | (KN/M) | (MM) | (KG/CM2) | Upto 1.0 | Upto 1.5 | Upto 2.5 | 20° | 30° | 45° |
| GD | 200/2 250/2 315/3 400/3 500/3 630/3 |
20 25 31 40 50 63 |
2.3 2.5 3.2 3.5 3.6 3.9 |
2.6 2.8 3.7 3.9 4.0 4.4 |
650 650 1000 1050 1200 1200 |
500 600 800 900 900 1000 |
400 450 650 650 800 800 |
300 400 400 500 500 500 |
300 450 450 500 500 500 |
300 500 500 500 500 500 |
| HD | 400/4 500/4 630/4 800/4 1000/4 1000/5 1250/4 1400/4 1400/5 1600/5 1600/6 1800/6 500/5 800/5 1250/5 |
40 55 70 90 110 110 140 145 155 180 180 200 55 90 140 |
4.6 4.8 5.0 5.6 6.0 6.7 7.0 7.8 8.8 9.5 10.8 11.4 6.0 6.3 8.0 |
5.2 5.4 5.7 6.1 6.6 7.6 7.8 8.7 9.9 10.7 12.1 12.5 6.5 7.1 9.0 |
1200 1200 1400 1600 1600 1800 1800 1800 2000 2000 2000 2000 1600 1600 1800 |
1000 1050 1200 1400 1400 1600 1600 1800 1800 1800 2000 2000 1400 1400 1800 |
800 900 900 1000 1200 1400 1400 1600 1800 1800 2000 2000 1200 1200 1600 |
500 500 500 500 500 500 650 650 650 800 800 800 500 500 650 |
500 500 500 500 650 650 800 800 800 900 900 900 650 650 800 |
500 650 650 650 800 800 900 900 900 1000 1000 1000 800 800 900 |
| EHD | 200/2 250/2 315/3 400/3 500/3 630/3 630/4 800/4 1000/4 1250/4 |
20 25 31 40 50 63 70 90 110 140 |
2.8 3.1 3.8 4.3 4.4 4.8 6.1 6.7 7.2 7.4 |
3.1 3.5 4.5 4.8 4.9 5.4 6.8 7.5 7.9 8.2 |
650 800 1200 1200 1400 1400 1800 1800 1800 1800 |
500 650 1000 1050 1200 1200 1400 1600 1600 1600 |
400 500 800 900 900 1000 1200 1400 1400 1600 |
400 400 500 500 500 500 500 650 650 750 |
400 400 500 500 500 500 650 800 800 900 |
450 450 500 600 650 650 800 900 900 1000 |
| |
|
| Copyright |
|
2000-2001, Jonson Rubber Industries. All Rights Reserved